GaN Charger Home > Wall Chargers > GaN Charger
EU 65W QC+PD GaN Charger
  • EU 65W QC+PD GaN Charger
  • EU 65W QC+PD GaN Charger
  • EU 65W QC+PD GaN Charger

EU 65W QC+PD GaN Charger

Features:
  • QC4.0,QC3.0,PD3.0,PD2.0,PPS,PD compatibility
  • Short Circuit Protection, OVP, OTP, OLP
  • Stabilized output and super fast charging
  • Efficiency(at 100% load): >=90%
  • Operating temperature: -10ºC ~ 40ºC
  • ETL,FCC,CE, PSE,CCC
Model: WP-BG65X
Specification
Input: AC 100~240V
Frequency: 50/60Hz 1.5A
Weight:138G
Rated power: 65W Max.
DC Output:   
USB-A QC3.0 :4.5V/5A,5V/4.5A,3.6~6V/3A,6.5~9V/2A,9~12V/1.5A
USB-C:  

PD: 5V/3A,9V/3A,12V/3A,15V/3A,20V/3.25A
PPS: PPS: 3.3~11V/5A

   
Power distribution

USB-A: 18W - 25W

USB-C: 65W
USB-A+C ( Max 65W )
 

USB-A interface protocol   QC3.0/2.0,SCP, FCP, AFC, Apple 2.4A DCP-1.5A     
USB-C interface protocol   PPS, PD3.0/2.0, QC3.0/2.0, FCP, AFC, Apple 2.4A DCP-1.5A 

Electrical Parameters
Ripple and Noise: 200mVp-p Max.
Under nominal input voltage and nominal load, Parallel with a E-CAP 47uF and C-CAP 0.1uF at the terminal of output rail , measure by Oscilloscope with 20MHz Band width.
Turn on delay time: 3 seconds Max.
Hold up time: 5mS  Max; Rise up time: 10mS max.
MTBF: 50,000 hours at normal input condition
Line regulation: less than ±5% while measuring at rated load and ±10% of input voltage changing
Load regulation: less than ±5%
Hi-pot dielectric strength: primary to secondary 3000Vac,10mA max, 60 seconds
Leakage current: 0.25mA max at 265Vac / 50 Hz
Insulation Resistance: 50MΩ min. at primary to secondary, added 500Vdc test voltage
Operation temp:-10℃~40℃
Storage temp:-20℃~75℃
Storage Humidity: 5% -75%

Packaging & Delivery
150pcs/Carton
Carton size: 535*315*280mm
Delivery Detail:sample within 7 work days,25~35 days for bulk order

Features
  • Charging mode:CC-CV(Constant Current-Constant Voltage)
  • High efficiency and low power consumption
  • Stabilized output and low noise
  • Efficiency(at 100% load): >=90%
  • Operating temperature:-20ºC ~ 45ºC
  • Storage temperature:-40ºC ~ 85ºC
  • Operating humidity:5%~90%RH

Safety protections
  • Over Voltage protection - When the output voltage is over 150% rated voltage, the power supply will be protected, and will work normally when fault is removed or power on again.
  • Short Circuit protection -  The input power shall decrease when output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed.
  • DIELECTRIC STRENGTH Hi-Pot: Primary to secondary, 3000Vac(or 4242Vdc)  10mA  60S(2 second for production)


Environmental and Safety Standard
RoHS-  Compliant
China -                      GB4943
Europe -                    EN62368
North American -       UL62368
Japan -                      J62368
Australia -                  AS/NZS 62368





 
Review

Contact Us
Welcome to check our quick service, Your inquiry will be instantly replied.
+86-769-86558721
ShiPai, DongGuang, China