Model: WP-G65X
Specification
Input: AC 100~240V
Frequency: 50/60Hz 1.5A
Weight:132G
Rated power: 65W Max.
| DC Output: |
|
| USB-A |
5V/3A,9V/2A,12V/1.5A,20V/1.8A; 5V/4.5A,4.5V/5A ( Max 36W ) |
| USB-C1: |
5V-15V/3A,20V/3.25A; 3.3V-16V/4A ( Max 65W ) |
| USB-C2 |
5V-15V/3A,20V/3.25A, 3.3V-16V/4A ( Max 65W ) |
| Power distribution |
USB-A: 36W
USB-C1: 65W
USB-C2: 65W
USB-C1+C2 ( Max 60W )
USB-C1/C2+A: 45W+18W ( Max 63W )
USB-C1+C2: 30W+30W ( Max 60W )
USB-C1+C2+A:30W+18W+18W ( Max 66W )
|
| USB-A interface protocol |
QC3.0/2.0,SCP, FCP, AFC, Apple 2.4A DCP-1.5A |
| USB-C interface protocol |
PPS, PD3.0/2.0, QC3.0/2.0, FCP, AFC, Apple 2.4A DCP-1.5A |
Electrical Parameters
Ripple and Noise: 200mVp-p Max.
Under nominal input voltage and nominal load, Parallel with a E-CAP 47uF and C-CAP 0.1uF at the terminal of output rail , measure by Oscilloscope with 20MHz Band width.
Turn on delay time: 3 seconds Max.
Hold up time: 5mS Max; Rise up time: 10mS max.
MTBF: 50,000 hours at normal input condition
Line regulation: less than ±5% while measuring at rated load and ±10% of input voltage changing
Load regulation: less than ±5%
Hi-pot dielectric strength: primary to secondary 3000Vac,10mA max, 60 seconds
Leakage current: 0.25mA max at 265Vac / 50 Hz
Insulation Resistance: 50MΩ min. at primary to secondary, added 500Vdc test voltage
Operation temp:-10℃～40℃
Storage temp:-20℃～75℃
Storage Humidity: 5% -75%
Packaging & Delivery
150pcs/Carton
Carton size: 535*315*280mm
Delivery Detail:sample within 7 work days,25~35 days for bulk order
Features
• Charging mode:CC-CV(Constant Current-Constant Voltage)
• High efficiency and low power consumption
• Stabilized output and low noise
• Efficiency(at 100% load): >=90%
• Operating temperature:-20ºC ~ 45ºC
• Storage temperature:-40ºC ~ 85ºC
• Operating humidity:5%~90%RH
Safety protections
• Over Voltage protection - When the output voltage is over 150% rated voltage, the power supply will be protected, and will work normally when fault is removed or power on again.
• Short Circuit protection - The input power shall decrease when output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed.
• DIELECTRIC STRENGTH Hi-Pot: Primary to secondary, 3000Vac(or 4242Vdc) 10mA 60S（2 second for production）
Environmental and Safety Standard
RoHS- Compliant
China - GB4943
Europe - EN62368
North American - UL62368
Japan - J62368
Australia - AS/NZS 62368
